Wavelink Avalanche Podręcznik Użytkownika Pobierz pdf (Strona 13)

2 - 3

The wireless connection is made using the default wireless [radio] interface on the mobile device therefore the mobile

device must be actively communicating with the network for this method to succeed.

If a Mobile Device Server is found, the Enabler automatically attempts to apply all wireless and network settings from the

active profile. The Enabler also automatically downloads and processes all available packages.

If the Enabler does not automatically detect the Mobile Device Server, the IP address of the Mobile Device Server can be

entered on the Connect tab of the Enabler setup. Please see Connection (page 2-7) for details.

Mobile Device Wireless and Network Settings

Once the connection to the Mobile Device Server is established, the mobile device Enabler attempts to apply all network

and wireless settings contained in the active profile.

The success of the application of settings is dependent upon the local configuration of control parameters for the Enabler.

These local parameters cannot be overridden from the Avalanche MC Console.

The default Enabler adapter control settings are:

• Manage network settings – enabled

• Use Avalanche network profile – enabled

• Manage wireless settings – disabled

To configure the Avalanche Enabler management of the network and wireless settings:

1. Open the Enabler Settings Panels by tapping the Enabler icon on the desktop.

2. Select File > Settings.

3. Select the Adapters tab.

4. Choose settings for the Use Manual Settings parameter.

5. Choose settings for Manage Network Settings, Manage Wireless Settings and Use Avalanche Network Profile.

6. Click the OK button to save the changes.

7. Reboot the device.

Preparing a Device for Remote Management

Two additional utilities are necessary for remote management. These utilities are included on mobile devices manufactured

after April 2007.

•The Remote Management Utility (RMU) must be installed on all mobile devices first – then you can control mobile

device reboot, storage RAM adjustment, real-time updates and Avalanche Enabler properties.

If in doubt, verify

RMU.CE.CAB exists in the \System folder. If the RMU.CE.CAB file is present when the Enabler is

installed, the RMU is also installed.

Important: If the OS package includes double-byte Asian fonts, the storage RAM property of the RMU must be higher than

the default value (40MB).

If the amount of storage RAM is too low, the Enabler returns a “Mobile unit out of resources” error.

To determine the minimum value required, inspect the RMU.StorageRAM>=nn parameter in the Criteria field for the OS

package. Generally, this setting should be approximately 40 MB above the amount of RAM in use on the device for a stan-

dard OS and 50MB above the amount of RAM in use for an OS with Asian fonts.

For example, if after installing all the software, the device shows 5MB in use, this setting should be about 45MB for a stan-

dard OS, 55 MB for an Asian font OS.

•Use the Wireless Configuration Application (WCA) when you want to remotely manage the Summit client device. This

utility is downloaded and installed in addition to the Remote Management Utility. The WCA is included when the Summit

radio driver software is updated. The WCA is automatically installed when the radio driver is updated.

Using Wavelink Avalanche to Upgrade System Baseline

This procedure assumes the Avalanche Enabler is already installed on the mobile device and is already in communica-

tion with the Avalanche MC Console.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

Wavelink Avalanche Podręcznik Użytkownika Strona 13

Komentarze do niniejszej Instrukcji